This question is regarding Triton Aquatronic thermostatic power shower - Shower Spares

low pressure light on and water cold

i have a aquatronic 4 shower and the low pressure light is on when the temp is turned to warm or hot but gose of when i turn it to cold also the water is cold all the time evan when its turned to hot
Asked 13 years ago by Anonymous
With the shower on check that the actuator on top of the stabiliser valve is activating the small button switch on the bottom of the printed circuit board, if not then a new stabiliser valve is required.
If the switch is activated then it is the pcb at fault.
The part(s) required can be ordered online via the link below.

http://www.showerdoc.com/shower-spares/triton/TRITO-PARENT-50-Triton-Aquatronic-4-electric

Answered 13 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Aquatronic thermostatic power shower - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Power Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Power Showers

For any other support request please get in touch.