This question is regarding Triton AS2000XT Power Shower Spares

AS2000XT Motor replacement

How do you replace the motor/pump assembly in the AS2000XT power shower, do you have instructions?
Asked 11 years ago by Liam

After switching off the main power to the shower, and turning off the hot and cold water supplies, remove part 10 by removing small tab on top of bottom dial and removing the screw under this. Remove other screws holding part 10 on.

http://www.showerdoc.com/shower-spares/triton/trito-84000130-triton-pump-and-motor-assembly-84000130

See the above link first before continuing, and maybe take a couple of pictures of the connections etc.

Then, from this, http://www.showerdoc.com/shower-spares/triton/trito-parent-186-triton-as2000xt

Remove part 2

Remove wiring from part 7

Remove screws holding parts 3 and 7 on

Check where the wires go on part 3 as you, drop down part 7 away from part 3 , turn part 3 to the side and remove it from part 6, and remove the wires from part 3.

Remove part 3.

Replacement of the motor is a reversal of the above steps, making sure all “O” rings go back securely.

If all works after this, pat self on back. Well done.

Answered 11 years ago by The Shower Doctor

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton AS2000XT Power Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Power Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Power Showers

For any other support request please get in touch.