This question is regarding Triton Aspirante 9.5kW Electric Shower (Brushed Steel) - ASP09BRSTL

Replace old shower

Looking to replace old redring instant 7S shower - will this be a big job, not looking to replace tiles. Also what is major difference between 8.5KW and 9.5KW.



Cheers

Steve
Asked 11 years ago by Anonymous

Fitting a more powerful shower to the existing wiring.

If your existing shower was installed with 6mm wiring (as it should have been) then fitting another shower (even up to one of the 10kw units) to the existing wiring should be no problem, depending on the length of the run off cable and how the cable is installed.

Here is a table that allows you to work out what you can do with the existing wiring, make sure you fill it in accurately as this can make a large difference to the eventual calculation.

http://www.tlc-direct.co.uk/Technical/Charts/VoltageDrop.html

You may also have to change the fuse

Up to 8.5kw 35 Amp fuse

Up to 9.5kw 40 Amp Fuse

Up to 10.5kw 45 Amp Fuse

If you are even in the slightest unsure about any of the above then please contact an electrician.

Answered 11 years ago by Anonymous

View Product and Order Online:

Do you require any more information about this shower?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Aspirante 9.5kW Electric Shower (Brushed Steel) - ASP09BRSTL

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Showers page. Alternatively, if you're looking for any other brands you should view our full range of Showers.

If you would like to buy this item or look at something similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.