This question is regarding Triton Aspirante 9.5kW Electric Shower (Riviera Sand) - ASP09TLRSD

Triton Aspirante Electric Shower 9.5Kw Riviera Sand - Asp09tlrsd

Hi, my Triton Aspirante Electric Shower 9.5Kw Riviera Sand - Asp09tlrsd is overheating, even on the coolest setting with temperature dial turn as far towards cold as possible the water is very hot. Is there anything I can do? Thanks
Asked 4 years ago by Linda Smith, Glasgow
The things to check first are:

1 That the main valve coming into your house is fully open.

2 Then check that the valve on the line to the shower is fully open.

If these valves are not fully open then there may not be enough water getting to your shower to cool it properly, it overheats the safety device cuts in (TCO) and turns the power off to the elements until it cools down and it all starts again!


Make sure that the shower head is clean and clear, that the hose isn’t kinked (this can happen just behind the hand set where it is difficult to see) also check the inside of the hose although it can look OK on the outside it could have collapsed internally


The other possibility is a faulty flow/stabilizer valve not allowing the correct amount of water into the shower.
There is a link below that explains the above. www.youtube.com/watch?v=m0xrObqfGqg

Answered 4 years ago by George Thomson

View Product and Order Online:

Do you need additional help to find the correct part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Aspirante 9.5kW Electric Shower (Riviera Sand) - ASP09TLRSD

If you've landed here and this question is not about your specific product, please take a look at these similar items on our page. Alternatively, if you're looking for any other brands you should view our full range of .

For any other support request please get in touch.