Bewitch shower continually cycles hot & cold
If the shower is cycling between hot & cold then the TCO on top of the heater can assembly is working ok, however here are a few things to check below.
The problem is either:
Lack of water pressure to the shower (Check Stop tap is fully open supplying the shower)
A leak inside the shower (Check the pressure switch diaphragm on the stabiliser valve at the top for leaks)
Wire terminals inside melting? (Check the TCO on the outlet pipe under the can and any other terminals visible)
The Outlet TCO on the outlet pipe is a usual suspect due to the terminals not having a good connection causing the wires to arch amnd melt, if this is the case then you need to replace the outlet pipe with TCO ( Item no 7) from this link provided to your shower - http://www.showerdoc.com/shower-spares/triton/TRITO-PARENT-62-Triton-Bewitch
Regards
Answered 13 years ago by Anonymous
View Product and Order Online:
Do you need any additional help to find the correct spare part?
Please click the following link if you would like to see other answers or ask a question regarding the Triton Aspirante/T80si/Opal Thermal Cut-out (TCO) - 22009860
If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Thermal Cut Outs Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.
If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Thermal Cut Outs
For any other support request please get in touch.