This question is regarding Triton Aspirante Topaz - Shower Spares

Won't heat

Hi The shower heats to approx 35 but no higher. When I turn the cold water tap on in the bath it heats to approx 37/38 but no higher. Can I fix this?
Asked 7 years ago by Emma
The things to check first are:

1 That the main valve coming into your house is fully open.

2 Then check that the valve on the line to the shower is fully open.




Make sure that the shower head is clean and clear, that the hose isn’t kinked (this can happen just behind the hand set where it is difficult to see) also check the inside of the hose although it can look OK on the outside it could have collapsed internally


The other possibility is a faulty flow/stabilizer valve not allowing the correct amount of water into the shower.


There is a link below that explains the above.

Answered 7 years ago by Barrie Seabright

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Aspirante Topaz - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.