This question is regarding Triton Avon thermostatic dual control mixer - built-in - Shower Spares

not hot enough

I have had a water meter fitted and the temp has dropped from my triton avon thermo shower is this due to the probable pressure drop or something else?

Is there any adjustment I can make behind the cover plate to lower the cold feed or raise the hot feed as I have it adjusted to full heat and it is still not hot enough it even seems colder on cold days....

Waiting with spanners in hand.....
Asked 9 years ago by Anonymous

The first thing I would do is remove the non return valves and make sure that there is no dirt in them then I would remove the thermostatic cartridge and make sure that the filters are clean and clear.


When the water meter was fitted they may have disturbed some debris in the pipe work.


If these checks don’t fix it then you may need a new thermostatic cartridge.

Answered 9 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Avon thermostatic dual control mixer - built-in - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Concealed Shower Valves Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Concealed Shower Valves

For any other support request please get in touch.