Won't run hot

Hi I replaced the cartridge kit to cure dripping and now I can't get it to run hotter than Luke warm. Dripping cured... The hot feed pipe is baking hot but the shower won't run hot - I have tried tips in the manual about commissioning etc. I reckon I have done something wrong in putting the cartridge in :-(
Asked 9 years ago by Anonymous

The usual problem is with the position of the knobs but I guess if you have read Triton’s fault finder you will have checked that.

The other things are, have you checked the filters? Turning on and off the water can sometimes disturb debris in the pipe work and block the filters, when you are checking the filters make sure that one of the check valves haven’t jammed and that the correct flow regulators have been fitted.

Other than these things it should just work, as it is almost impossible to fit the service kit incorrectly, but I guess if the above doesn’t work then take it out and just double check that it is fitted correctly.

  

Answered 9 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Bellisimo Concentric Exposed Mixer Shower - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Exposed Shower Valves Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Exposed Shower Valves

For any other support request please get in touch.