Faulty buttons
The hot (2 bar button) doesn't work. When you press it, it switches to the 1 bar button. The shower heats the water, but the STOP button fails to work. This all started after the shower was showing low pressure and suddenly shutting off (not happening now) Do you think it's the Control PCB?
The things to check first are.
1 That the main valve coming into your house is fully open.
2 Then check that the valve on the line to the shower is fully open.
If these valves are not fully open then there may not be enough water
getting to your shower to open / close the safety device that allowspower through to the elements
Make sure that the shower headis clean and clear, that the hose isn’t kinked (this can happen just behind thehand set where it is difficult to see) also check the inside of the hosealthough it can look OK on the outside it could have collapsed internally
If all these are OK then it is likely that you have a faulty power PCB
http://www.showerdoc.com/TRITO-7073333-Triton-Power-Pcb-7073333
Answered 12 years ago by The Shower Doctor
View Spares and Order Parts:
Triton Bezique II Shower Spares
Do you need any additional help to find the correct spare part?
Please click the following link if you would like to see other answers or ask a question regarding the Triton Bezique II - Shower Spares
If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.
If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers
For any other support request please get in touch.