This question is regarding Triton Biarritz - Shower Spares

triton biarritz. runs hot/ cold

runs hot and cold, took shower head off to check flow and temp,same thing happened plus small pieces of dirt or limescale came out, any one help ?
Asked 13 years ago by Anonymous
Check that the hose has not collapsed internally.
Check that gauze filter in inlet to solenoid valve is clear.
Check water mains stopcock and any isolation valve in the feed to the shower are fully open.
Check with your supplier that there has not been a reduction in supply flow or pressure .
If all above are ok then it is likely to be the stabiliser valve at fault which is now obsolete and no longer available so a new shower is required.
Our recommended replacement is the Triton T80z which while not a direct replacement should be straightforward to fit. The appropriate wattage version can be ordered online via the link below.

http://www.showerdoc.com/showers/triton/electric-showers

Answered 13 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Biarritz - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.