This question is regarding Triton Cara Electric Shower - Shower Spares

Triton Cara Shower fault

I fitted the shower for my daughter and it had been working fine. The water has suddenly started getting very hot. I did a recommissioning on it and bits came out of the pipe and it worked ok again. It has now started doing the same again but despite going through the start up process it is either very very hot or cold depending on the position of the dials. The flow, even on cold is poor yet the supply is clear and powerful. There is no discolourisation on the TCO and I'm thinking Stabilizer/flow valve assembly, I had to fit one recently to my own shower but that was easy to spot because it was leaking. Any ideas ? as I don't want to cost my daughter too much money if I can help it
Asked 10 years ago by Anonymous
First check the inlet filter in the solenoid valve is clear, also check the head and hose. If all is well then I would like you suspect the stabiliser valve.

Answered 10 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Cara Electric Shower - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.