This question is regarding Triton Caselona III - Shower Spares

water shut off

hi guys . just moved into a rented house and they have a Caselona3 in the bathroom. heats up fine but the only problem is that to turn it on and off requires using the main isolation switch with a pull cord. ive replace the on/off microswitch but still no good. it cant be the solenoid as water stops when the pull cord is pulled. Any advice would be appreciated thanks
Asked 5 years ago by Kevin
Below is the usual advice.


If when you switch off the shower at the main isolator and the shower keeps running then you have a faulty solenoid valve.

www.youtube.com/watch?v=NzJjzWqxesc


When you switch off the shower at the main isolator and the water stops running, then you have a faulty on/off switch or a faulty PCB or a micro switch that is sticking on.

From your question you would appear to have covered most of these things.

The only way the solenoid can remain open is for it to be receiving power so you will have to trace back to find out where the power is coming from./

Answered 5 years ago by George Thomson

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Caselona III - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.