This question is regarding Triton Ivory III - Shower Spares

Descale

How do I descale the inside of the triton III shower. I have descaled the head but the shower is too hot on on setting 2 and it is too cold on setting 1.
Asked 13 years ago by Chris
There is really no advisable way to descale the insides of electric showers.
From your description it sounds more like a water flow problem.
Check the hose is not kinked or collapsed internally.
Check the mains stopcock and any isolation valve in the supply to the shower are fully open.
Check the filter in the inlet to the solenoid valve is clear.
If all above are ok then it is likely to be the stabiliser valve at fault and assuming you have an Ivory III it can be ordered online by clicking on the link below.

http://www.showerdoc.com/shower-spares/triton/TRITO-P12120800-Stabiliser-valve-and-solenid-assembly

Answered 13 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Ivory III - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.