Triton Ivory shower

Went to have a shower this morning and noticed that the power light did not light up and also the water was not hot. I took the cover off the shower to see what it could be, and found that the wires going into the two top contacts on the micro-switches looked to have shorted out and the protective sleeve had melted around them. I have taken the micro-switches off and only one of them seem to click tidy when you push the black button/switch in and out. Is there any chance you might know what the cause of this could be and is it worth getting fixed??? Many Thanks
Asked 13 years ago by Anonymous
If you click on the link below it will take you to the parts list for the Ivory and you will see a lot of the parts are now obsolete and this may help you to decide whether to repair or replace. Details of our recommended replacement can be found at the bottom of this page.

http://www.showerdoc.com/shower-spares/triton/TRITO-PARENT-77-Triton-Ivory

The cause of the fault is almost certainly the spade connectors on the wires having gone high resistence causing overheating. New wires can be made by yourself or an electrician and replacement microswitches can be ordered online via the above link.
Unfortunately the wire kit is no longer available.

Answered 13 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Ivory - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.