This question is regarding Triton LP Valve Cartridge Including Seals and Knob (no brass housing)

Hot and cold water isolation to enable to replace cartridge ?

I have an isolation valve on the hot water feed but don't know how to isolate the cold water tank feed into the cartridge so I can replace with new cartridge.
Asked 5 years ago by Richard Thurlwell, Northwich
This is a bit difficult without seeing/understanding the lay out of your plumbing, however......

There should be two valves coming from your cold water storage tank one for the hot and one for the cold.

If not then you may just have one from cold water tank which will turn off the hot water and the cold water is coming from the mains.

This will mean you have unequal pressures high pressure on the cold low, pressure on the hot, this valve is not designed to cope with unequal pressures however if this is the system you have and the valve has been working for years, then it should still work.

Answered 5 years ago by George Thomson

View Product and Order Online:

Do you require any further help with Tap or Shower Cartridges?

Please click the following link if you would like to see other answers or ask a question regarding the Triton LP Valve Cartridge Including Seals and Knob (no brass housing)

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Cartridges page. Alternatively, if you're looking for any other brands you should view our full range of Cartridges.

If you would like to buy this cartridge or look others from the same brand, please view our Replacement Triton Cartridges (All)

For any other support request please get in touch.