This question is regarding Triton LP4000/5000 - Shower Spares

Triton LP Cartridge

I have replaced the whole cartridge on a Triton LP. The old one had to be broken up to remove. When first installed it was leaking slightly. I have removed it and silicon greased all the O rings and slid it back in. It is now leaking worse. All the O rings are staying in place as they are still in the correct location when I withdraw it. The existing shower is around 10 - 15 Years old. Have I maybe got the wrong cartridge??
Asked 9 years ago by Anonymous
When you push the new cartridge home make sure the seals are well lubricated. We tend to super glue them into place, as due to the shape of the seals on the low pressure cartridges they have a tendency to roll back and not sit in properly as you push in the last few millimeters. It can be tricky to get this right, it is also difficult to see on the recessed models so take your time.

Answered 9 years ago by Anonymous

Did you ever manage to get it to fit ... i have tried and two different plumbers without any success?

Answered 9 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton LP4000/5000 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Concealed Shower Valves Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Concealed Shower Valves

For any other support request please get in touch.