This question is regarding Triton Martinique - Shower Spares

Triton Martinique No Water Good Solenoid

Hi Shower Doc, My tenant has a Martinique shower with no water flow. I have tested the solenoid coil and it reads 3.8k ohms (thanks for the video!!) so I'm sure it's not that. Worth replacing anyway? The manual states if there is no flow it could be the TCO. Let's say I test that and it's ok, where do I go next? The taps to the sink and bath have flow so could there be a block in the pipe from bath to shower? With power on and the cover off I checked to see where the clicks were happening and the top barrel on the PCB ( just below 3 on your spares diagram) showed a blue spark initially but now just click sounds come from the board and barrels. Trying to establish if I need a couple parts (probably half the cost of a new unit) or if it's better to get a whole new unit - current one is marked as QC checked 01/15 so fairly recent in the scheme of things. Any help greatly appreciated!
Asked 4 years ago by E MILROY, Aberdeen
www.showerdoc.com/triton-martinique-shower-spares

Check that there is 230-240v into the shower. If so then the solenoid may be faulty or the pcb.If you are going to change the main pcb , you will have to replace the cover one as well.

Answered 4 years ago by Barrie Seabright

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Martinique - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.