Triton pressure light

hi,shower was making a buzzing sound,then the pressure light came on and it stopped workin.when switched on it now clicks then the pressure light comes on and it goes to cold setting,what part would i need?
Asked 12 years ago by Anonymous

I think you may have a faulty Thermal Cut Out

A faulty TCO will have no continuity across the two terminals (The black thing on top of the heating tank)

Therefore a good TCO will have power at both connections and a faulty TCO will have power at only one.

(The function of the TCO is, if the water over heats it cuts the power off to the elements)

See Video.

http://www.youtube.com/user/showerdoc#p/u/2/_zi8JbEMYMs

 

Also check

1 That the main valve coming into your house is fully open.

2 Then check that the valve on the line to the shower is fully open.

3 Make sure that the shower head is clean and clear, that the hose isn’t kinked (this can happen just behind the hand set where it is difficult to see) also check the inside of the hose although it can look OK on the outside it could have collapsed internally

It may be some other fault but we need to get these checks out of the way first


 

Answered 12 years ago by The Shower Doctor

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Martinique - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.