This question is regarding Triton Opal II - Shower Spares

opal 2 overheating

My opal 2 has started overheating. The top left section above the tco gets hot to the touch if it is used on 2 circles for more than 5 mins. on 1 circle it feels fine even if the temp is turned all the way up.

I had opened it as i was smelling a tcp like smell. the tco sticker is discoloured and the plastic housing has started to burn. the wiring is fine apart from the white cable that goes from the tco to the pcb. it has become hard and inflexible.



am presuming that it is the heating element and that i should change the tco to be safe can i replace the white wire?
Asked 12 years ago by Anonymous
Would suspect there is a poor connection to the TCO causing the overheating , you need to replace the tco and the wire and make sure connections are good and tight.
TCO can be ordered online by clicking on the link below.

http://www.showerdoc.com/shower-spares/triton/TRITO-22009860-Triton-Thermal-Cut-out-22009860

Answered 12 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Opal II - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.