Too Hot

I have a Triton opal 10.5 kw shower, it is 2/3 years old and has been working fine up to few weeks ago, on the Hottest setting with the dial on 1 it is almost scalding hot, and cannot control the heat, it has good water pressure and we have changed the shower head, if you use the lower heat setting with the dial on 10, it is barely luke warm and very little water pressure. Any ideas please.
Asked 13 years ago by Roger
This is a water flow problem.

Check that the hose is not kinked or collapsed internally.
Check that mains stopcock and any isolation valve in the feed to the shower are fully open.
Check the gauze inlet filter in the shower is clear.
If all the above are ok then it is likely tobe the stabiliser valve at fault, replacementb can be ordered online by clicking on the link below.

http://www.showerdoc.com/shower-spares/triton/TRITO-P12120801-Stabiliser-valve-solenoid-assembly

Answered 13 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Opal II - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.