Triton opal showewr

My shower was working ok then made a funny noise and the water pressure dropped and only ran luke warm
Asked 13 years ago by Anonymous

It may be a faulty element in the heating tank (there are two, three in 10kw showers) you can check them with a multi meter you should have a reading of around 12>18 ohms.

If you have power to the elements and no heat it's probably the elements, no power to the elements then it's probably the power printed circuit board

 

If you don’t have a multimeter  we sell them at £10 each with a guide on how to use them for checking and testing the various parts of your shower.

 

Apart from helping to fix your shower, they are really useful for checking you have a power supply to appliances, for checking fuses, letting you know much power you have left in batteries

(so you know if they are dud or not)  and lots of other jobs, in short they are well  worth the £10.

http://www.shower-warehouse.co.uk/erol.html#55x878

Once the fault is diagnosed then a new heating can or microswitch can be ordered online via the link below.

http://www.showerdoc.com/shower-spares/triton/TRITO-PARENT-88-Triton-Opal


Answered 13 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Opal - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.