This question is regarding ....Triton Outlet Pipe Assembly C/w Wires and PRD - 85000250

Triton Outlet Pipe Assembly too hot

What exactly does this do, my t80xr is similar, it does not respond to the settings on the manual stat settings too well. Water is far too hot until turned to number 4 when low pressure light then comes on, never used to get so hot, wondering if this monitors water out temp?
Asked 12 years ago by Anonymous

This cuts the power off to one element if the water temperature gets too high.

However...........

The things to check first are.

1 That the main valve coming into your house is fully open.

2 Then check that the valve on the line to the shower is fully open.

If these valves are not fully open then there may not be enough water
getting to your shower to cool it properly the overheat safety device will turn
the power off until it cools Then it all starts again

Make sure that the shower head is clean and clear, that the hose isn’t kinked (this can happen just behind the hand set where it is difficult to see) also check the inside of the hose although it can look OK on the outside it could have collapsed internally

The other possibility is a faulty flow/stabilizer valve not allowing the correct amount of water into the shower.


Answered 12 years ago by Anonymous

View Product and Order Online:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the ....Triton Outlet Pipe Assembly C/w Wires and PRD - 85000250

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton

For any other support request please get in touch.