Elements switching off due to low pressure

Hi I have a Triton Opal and when using the shower for what appears to be no reason the shower goes low pressure and switches off the elements.

Could this little TCO cause this as there is no change in water flow?

I have replaced most other parts !
Asked 10 years ago by Peter

The things to check first are.

1 That the main valve coming into your house is fully open.

2 Then check that the valve on the line to the shower is fully open.

If these valves are not fully open then there may not be enough water
getting to your shower to open / close the safety device that allowspower through to the elements

Also check that the actuator that is mounted on top of the stabiliservalve is making contact with the small micro switch on the bottom of the PCB ifall of these things are OK then you may have a faulty PCB.

Answered 10 years ago by The Shower Doctor

View Product and Order Online:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton T55i/T60i Outlet Pipe Assembly - 83303980

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Other Spares Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Other Spares

For any other support request please get in touch.