This question is regarding Triton Power Pcb - 7073333

Triton Bezique II tripping

Hi. My Bezique II keeps jumping from highest heat setting (the button with 2 red lines) to lower settings (middle button, 1 red line, or bottom, blue line) by itself. It's not low pressure. The power light flashes when it's about to happen and there's green flashing (arcing?) on this PCB when it happens. It's intermittent but frequency is increasing. Does it sound like PCB's faulty or could this just be a symptom of another problem? Would appreciate guidance, please!
Asked 11 years ago by Anonymous

The things to check first are.

1 That the main valve coming into your house is fully open.

2 Then check that the valve on the line to the shower is fully open.

If these valves are not fully open then there may not be enough water
getting to your shower the pcb will then try to reduce the temperatureby switching off an element.

If the valves are OK then itis likely to be a PCB fault.

 

Answered 11 years ago by The Shower Doctor

View Product and Order Online:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Power Pcb - 7073333

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton

For any other support request please get in touch.