Power on but no water out

It is a Triton Rapide 3 plus - I have a power neon lit on the shower but when the button is pressed on the shower nothing happens i.e. no water. The water pressure switch could be faulty do you think?
Asked 11 years ago by Nigel

It may be your solenoid valve, you can check it if you havea multi meter, you should have a reading of at least k3.5 ohms, across the twoterminals any less and you need a new valve. (Check the valve in the failedstate.) (When it has stopped working!)

 

If there is power getting to the solenoid and it is notoperating then there is a good chance that you have a faulty solenoid.

http://www.youtube.com/watch?v=NzJjzWqxesc

The videois intended as a guide and does not cover every shower.

 

If you don’t have a multimeter  we sell them  with a guide on how to use them for checkingand testing the various parts of your shower.

 

Apart from helping to fix your shower, they are reallyuseful for checking you have a power supply to appliances, for checking fusesand letting you know much power you have left in batteries

(So you will know if they are good or not) and lots of otherjobs, in short they are well worth a few pounds

http://www.showerdoc.com/installation/electrical-products/SKYTRO-600-005-Digital-Multi-Tester

 

 

 

Answered 11 years ago by The Shower Doctor

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Rapide 3 plus - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.