This question is regarding Triton Rapide 4 - Shower Spares

Rapide 4+ control not working

Hi again, i have changed the thermal cut out and the shower still does not get warm. Originally i had a low pressure fault. the pressure out of the shower is fine turning to a dribble when turned to hot. the shower still comes on/off via the pull cord and not the on/off switch. The switch has continuity. The inlet lifts to the micro switch only when the control pcb is disconnected. With it connected there is a pulsing as it lets water in and does not make contact with the micro switch. Either way there still isn't any heat produced.

I am thinking control pcb issue but does this still explain the no heat issue?



Thank you for reading.
Asked 11 years ago by Paul
I think you have a faulty power PCB as there seams to be no power to one or both of the elements.

If when you switch off the shower at the mainisolator and the shower keeps running then you have afaulty solenoid.

When you switch off the shower at themain isolator and the waterstops running, then you have a faulty on/off switch or a faulty PCB or a micro switch that is stickingon.

Answered 11 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Rapide 4 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.