This question is regarding Triton Amber/Ivory/T80/T100 Solenoid Valve Assembly - 83300450

Triton shower not working

the water pressure was was low and the hot water was boiling hot evcen in low settings.then there was a noise from the unit ,like a bang,then evderything stopped working.there is no noise as of the pump or any sign of life.please help.
Asked 12 years ago by Anonymous

You don’t mention which model you have, however one of your elements has gone this may have been caused by a lack of water.

The things to check first are.

1 That the main valve coming into your house is fully open.

2 Then check that the valve on the line to the shower is fully open.

If these valves are not fully open then there may not be enough water
getting to your shower to cool it properly the overheat safety device will turn
the power off until it cools Then it all starts again

 

If there is some heat it may be a faulty element in the heating tank (there are two, three in most 10kw showers) you can check them with a multi meter you should have a reading of around 12>18 ohms.

If you have power to the elements and no heat it's probably the elements, no power to the elements then it's probably a micro switch.

 

If you don’t have a multimeter  we sell them at £10 each with a guide on how to use them for checking and testing the various parts of your shower.

 

Apart from helping to fix your shower, they are really useful for checking you have a power supply to appliances, for checking fuses, letting you know much power you have left in batteries

(so you know if they are dud or not)  and lots of other jobs, in short they are well  worth the £10.

 

http://www.showerdoc.com/installation/electrical-products/SKYTRO-600-005-Digital-Multi-Tester

 

If you also now have no water you may have a faulty solenoid valve

It may be your solenoid valve, you can check it if you have a multi meter, you should have a reading of at least k3.5 ohms, across the two terminals any less and you need a new valve. (Check the valve in the failed state.) (When it is not working!)

 

If there is power getting to the solenoid and it is not operating then there is a good chance that you have a faulty solenoid.

 

If you don’t have a multimeter  we sell them  with a guide on how to use them for checking and testing the various parts of your shower.

 

Apart from helping to fix your shower, they are really useful for checking you have a power supply to appliances, for checking fuses and letting you know much power you have left in batteries

(So you will know if they are good or not) and lots of other jobs, in short they are well worth a few pounds

http://www.showerdoc.com/installation/electrical-products/SKYTRO-600-005-Digital-Multi-Tester

 

 

 

 

Answered 12 years ago by The Shower Doctor

View Product and Order Online:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Amber/Ivory/T80/T100 Solenoid Valve Assembly - 83300450

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Solenoid Valves & Coils Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Solenoid Valves & Coils

For any other support request please get in touch.