This question is regarding Triton 7.5kW/8.5kW/9.5kw Electric Shower Stabiliser Valve Assembly - P07810800

temperature erratic variation

After using shower at heating sw position 3 and flow 4, and then switching unit off for a short period ( 1- 2 mins), when unit is switched back on water temp initially becomes VERY hot, then fully cold after approx 5 sec. Required temp then only achieved in 20 secs.Faulty stabiliser valve??
Asked 3 years ago by Douglas Johns, Winchester
Turn the shower temperature control from fully cold to fully hot. When you do this slowly there should be a gradual change in temperature and flow. At fully hot you should have not much more than a dribble coming from the hose, and on fully cold you should have a good strong flow. If you do not have this difference, or the flow or temperature is erratic, then you may have a faulty flow/stabilizer valve.

Also check the head and the hose are clear.

Answered 3 years ago by Barrie Seabright

View Product and Order Online:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton 7.5kW/8.5kW/9.5kw Electric Shower Stabiliser Valve Assembly - P07810800

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Other Spares Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Other Spares

For any other support request please get in touch.