no hot water

no hot water but plenty of cold..can this be repaired by diy..how does the front cover come off

thanks
Asked 9 years ago by Anonymous

If the shower is absolutely cold then I think you may have a faulty Thermal Cut Out

A faulty TCO will have no continuity across the two terminals (The black thing on top of the heating tank)

Therefore a good TCO will have power at both connections and a faulty TCO will have power at only one.

(The function of the TCO is, if the water over heats it cuts the power off to the elements)

See Video.

http://www.youtube.com/user/showerdoc#p/u/2/_zi8JbEMYMs

If there is some heat it may be a faulty element in the heating tank (there are two, three in most 10kw showers) you can check them with a multi meter you should have a reading of around 12>18 ohms.

If you have power to the elements and no heat it's probably the elements, no power to the elements then it's probably a micro switch.


If you don’t have a multimeter  we sell them at £10 each with a guide on how to use them for checking and testing the various parts of your shower.


Apart from helping to fix your shower, they are really useful for checking you have a power supply to appliances, for checking fuses, letting you know much power you have left in batteries

(so you know if they are dud or not)  and lots of other jobs, in short they are well  worth the £10.


http://www.showerdoc.com/installation/electrical-products/SKYTRO-600-005-Digital-Multi-Tester

I am often asked “Is this a DIY job” to be honest I can’t answer that, because without knowing someone, it isn’t possible to assess their skills?

I should say that most jobs on showers although relatively easy (from my point of view) can be fiddly and an extra pair of hands, long thin fingers and the strength in your hands of an all in wrestler are a help!

The secret is, observing very carefully when things are taken to bits, their order and orientation, taking notes and/or photos as you go can also be a help.

When you are working with electricity and water so make sure it is switched off and turned off before you start.

If you think you can do the job but aren’t just that confident, it may help to buy the part and compare it to the faulty part, you will then be able to see where the screws, wires, nuts, or washers etc. go, if then you think it is to complicated, at least you will have the part when the plumber or electrician arrives.

We will always be here to offer help and advice if you run into a problem, however it is not the same as being on site where we can get the overhaul picture, if you are still not sure, now is the time to call in a professional.

Answered 9 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton T100e Thermostatic Care electric - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.