This question is regarding Triton T100xr electric - Shower Spares

on/off swich

Hello. My T100xr shower will no longer switch on/off at the unit. As soon as I apply power from the 45amp pullcord/isolator switch, the unit comes on on the water runs. The low pressure and cold LED's are lit. After a few seconds the unit switches itself to the hot temperature setting and the low pressure LED goes out, but I can't turn it off at the unit. What part(s) do I need to fix this, please ? Thank you
Asked 7 years ago by Michael
Definitely sounds like a PCB problem however there problems with the new board as it doesn't always speak to the board on the front cover and you have to replace that as well, the problem is you can't tell until you have fitted the power PCB

The link is below make sure you read the notes on the page.

www.showerdoc.com/triton-power-pcb-with-screws-83315930

Answered 7 years ago by George Thomson

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton T100xr electric - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.