shower problem

shower keeps going hot and cold
Asked 12 years ago by Anonymous
Check the shower hose is not kinked or collapsed internally.
Check that incoming mains water stoopcock and any isolation valve in the feed to the shower are fully open.
Check with your supplier id there has been any reduction in water supply pressure or flow.
Check that gauze filter in inlet to the solenoid valve is clear.
If all above are ok then it is likely to be the stabiliser valve at fault , replacement can be ordered online by clicking on the link below.

http://www.showerdoc.com/shower-spares/triton/TRITO-P12120801-Triton-Stabiliser-Valve-solenoid-Assembly-P12120801

Answered 12 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton T100xr electric - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.