triton t300si remote shower
If you have a stabilser valve leaking in a shower then this normally will leak down on to the hot solenoid coil below causing it to fail. This is why you had to replace the coil.
Going by your chain of events....I think that when the shower was initially leaking this must have caused low pressure to the shower and over heat on occasions.
In turn this now sounds like the TCO (thermal cut out switch must have activated at some point and in turn caused it to fail, meaning your shower will only produce cold water.
Was the shower over heating before you realized you have a leak from the stabiliser Valve?
The thermal cut out switch can be found as item 4 via this link provided to the spares diagram for your model of shower - www.showerdoc.com/triton-t300si-remote-shower-spares
Before purchasing this TCO you can test your old one via this link to the TCO which also has an instructional video on how to test a TCO - www.showerdoc.com/triton-thermal-cut-out-22009860
Answered 9 years ago by Anonymous
View Spares and Order Parts:
Triton T300si Remote Shower Spares
Do you need any additional help to find the correct spare part?
Please click the following link if you would like to see other answers or ask a question regarding the Triton T300si Remote - Shower Spares
If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.
If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers
For any other support request please get in touch.