This question is regarding Triton T300si Remote - Shower Spares

Water not getting hot

Hi I have just replaced the stabiliser valve as water was spraying out the top,but now the water is only staying luke warm regardless of the dial setting.With the spray hose open ended the water flow is good with no pressure drop when the temp. dial is set to max. Is this a faulty new valve or is there another fault...any help would be appreciated dont want waste money on unneccesary parts..cheers
Asked 8 years ago by Andy
Have checked both elements 11.8 ,have done a continuity check across tco terminals and that bells out,but water is still tepid,3.6 across solenoid terminals and can hear pump running,just need to know what the best cost effective route is ...cheers

Answered 8 years ago by Andy Parry

In this case you may have a faulty PCB that is causing the problem.

Answered 8 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton T300si Remote - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.