Triton T4i Booster Shower Pump with thermostatic bar mixer
Trouble is, while hot is gravity fed from cw cistern/hw cylinder, cold supply is mains fed (at least it is from the taps). I know this is not within spec, but when set to cold, there is no increase in flow, so I wonder if there is a restrictor fitted in the cold supply to equalise pressures, allowing temp to run at max of 45 degrees.
Would it be permissible to use this pump with this installation please?
First thing to check is the filters which are usually inside the large nuts that connect the mixer to the wall there is also the possibility that flow restrictors are fitted in with these nuts.
Other than that the T40i would be a good soluition but it shouldn’t be fitted to the water mains.
Answered 9 years ago by Anonymous
View Product and Order Online:
Do you need additional help to find the correct part?
Please click the following link if you would like to see other answers or ask a question regarding the Triton T40i Wall Mounted Booster Pump (White) - T040004I
If you've landed here and this question is not about your specific product, please take a look at these similar items on our page. Alternatively, if you're looking for any other brands you should view our full range of .
For any other support request please get in touch.