This question is regarding Triton T60i - Shower Spares

Shower stopped working triton T 60 i

After turning off the water at the stop cock to repair a problem in the cistern , i turned the supply back on to find no water ran from the shower and the operating light was not lit. Power is going into the shower . Having tried the operating instructions and commissioning procedures in the users guide I have not had any luck. Is it possible that the pressure relief valve has blown and is there any way to confirm this ?
Asked 8 years ago by Anonymous

 I would turn the water off again switch the shower off at the mains and get someone to help you then disconnect the shower at the inlet turn the water back on and gar the person who is helping to assure you that you have a good supply going to the shower also in some of the inlets (part 10) there was a filter fitted just check that it is clean and clear, if it isn’t there don’t worry it was often thrown away!

If you have a good supply of water at the inlet then it is likely to be a faulty Stabilising Valve  (part 5)

http://www.showerdoc.com/triton-t60i-shower-spares

Answered 8 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton T60i - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.