water temperature cold

neon light is on, only cold water no mater where temp regulator is set.
Asked 10 years ago by Anonymous

I thinkyou may have a faulty Thermal Cut Out


A faulty TCO will have nocontinuity across the two terminals (The black thing on top of the heatingtank)

Therefore a good TCO willhave power at both connections and a faulty TCO will have power at only one.

(The function of the TCOis, if the water over heats it cuts the power off to the elements until thewater cools, this can take up to 15mins)

www.showerdoc.com/triton-thermal-cut-out-22009860

See Video.

http://www.youtube.com/user/showerdoc#p/u/2/_zi8JbEMYMs

Afterfitting a new TCO

When fitting a new TCO listen to the shower, afterit has completed its first on/off cycle, if when it is switched off you hear itcontinuing to heat (Noise like a kettle starting to boil) this will mean thatthere is a switch or a relay that is stuck in the on position, this is keepingan element energised and this is probably what caused the original TCO to fail.

If this is the case replace the faulty switch orrelay and make sure that you switch the shower off at the isolating switch whenthe shower is not in use because this maycause the new TCO to fail.

Answered 10 years ago by The Shower Doctor

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton T70si - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.