This question is regarding Triton T80 - Shower Spares

Triton T80!

Triton t80i shower. been working fab but we are having some plumbing work done & some sannd got in to pipes. Cleared that but now the on/off button will not switch water off. If there is water in there could this be the problem?

Also are these showers still available in South Africa?
Asked 13 years ago by Anonymous

Some solenoids have a filter in the inlet, so I would see if that is blocked.

If not check the solenoid.

 

I dont know if The t80i or t80 are available in S.A.

 

 

 

The normal fault with a solenoid valve is the coil breaks down, we can supply the coils separately however you have to be careful when changing them over.

Turn off the water and power then place two screwdrivers between the base of the coil (usually brown or white) and the base of the solenoid body and ease the old coil off the body.

On some units the coil can be replaced without removing the existing solenoid from the shower case on others it will be necessary to remove the valve to fit the new coil.

 

Answered 13 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton T80 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.