This question is regarding Triton T80si - Shower Spares

Triton T80SI

Hi, i have an old school T80SI. Dont have much pressure in the area I live in and also don't have a water tank. Only have a boiler. The water temperature keeps going either really hot or really cold, there is no in between. Would this be a termastate problem? Is there a replacement part I could get or alternatively a new shower with some kind of pump that doesn't require to feed of a tank (cistern). Any suggestions would be greatly appreciated :D
Asked 13 years ago by Anonymous
This sounds like a water supply problem.
Check that mains stopcock and any isolation valve insupply to shower are fully open.
Check that hose is not kinked or collapsed internally and the head is clear.
Check the filter in the inlet to the solenoid is clear.
Check that dynamic pressure is at least 1.0bar.
If all above are ok then it may be the stabiliser valve is at fault, a replacement can be ordered online by clicking on the link below.

http://www.showerdoc.com/shower-spares/triton/TRITO-83300450-Solenoid-valve-assembly

Regarding a pumped unit if you are supplied from the water mains it is illegal to install such a unit.

Answered 13 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton T80si - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.