Triton T80si going cold intermittently
Thanks
Martyn Walker
Things to check for:
Lack of water pressure to the shower (Check Stop tap is fully open supplying the shower)
A leak inside the shower (Check the pressure switch diaphragm on the stabiliser valve at the top for leaks)
Wire terminals inside melting? (Check the TCO on the outlet pipe under the can and any other terminals visible)
The Outlet TCO on the outlet pipe is a usual suspect due to the terminals not having a good connection causing the wires to arch amnd melt, if this is the case then you need to replace the outlet pipe with TCO ( Item no 10) from this link provided to your shower - http://www.showerdoc.com/shower-spares/triton/TRITO-PARENT-12-Triton-T80si
If the shower goes cold and stays cold for about 10-15 mins then it sounds like the TCO on top of the heater can is cutting in a nd the shower is over heating and causing this problem.
This could be down to a stabiliser valve problem.
Answered 13 years ago by Anonymous
View Spares and Order Parts:
Triton T80si Shower Spares
Do you need any additional help to find the correct spare part?
Please click the following link if you would like to see other answers or ask a question regarding the Triton T80si - Shower Spares
If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.
If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers
For any other support request please get in touch.