Triton T80Si PRD problem

Hi,



I have just changed the PRD in the shower, thanks for your amazing delivery it was here within 24 hours of ordering!!!!

Once fitted the shower seems to flow nicely through the hose and head, it runs OK using the single red bar heat selection, the temerpature is controlled by the dial, but when I select the two bar setting the water is really hot and the temperature control know has no effect. I am assuming that this is the problem that caused the PRD to go in the first instance, any advice would be gratefully received.



Regards,



John Roseblade
Asked 9 years ago by John

The things to check first are:

1 That the main valve coming into your house is fully open. 

2 Then check that the valve on the line to the shower is fully open. 

If these valves are not fully open then there may not be enough water getting to your shower to cool it properly the overheat safety device will turn the power off until it cools Then it all starts again

 

Make sure that the shower head is clean and clear, that the hose isn’t kinked (this can happen just behind the hand set where it is difficult to see) also check the inside of the hose although it can look OK on the outside it could have collapsed internally 

The other possibility is a faulty flow/stabilizer valve not allowing the correct amount of water into the shower. 

Answered 9 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton T80si - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.