Temperature
I have Triton Bewitch 10.5KW shower, unfortunately the temperature is not operating correctly. When turning down the water pressure the water produced is hot, however, turn the water pressure up and the shower goes cold?
Could it be the thermal switch?
Please could you advise?
Thank-you
Justin
Answered 13 years ago by Anonymous
It may be a faulty element in the heating tank (there are two, three in most 10kw showers) you can check them with a multi meter you should have a reading of around 12>18 ohms.
If you have power to the elements and no heat it's probably the elements, no power to the elements then it's probably a micro switch.
If you don’t have a multimeter we sell them at £10 each with a guide on how to use them for checking and testing the various parts of your shower.
Apart from helping to fix your shower, they are really useful for checking you have a power supply to appliances, for checking fuses, letting you know much power you have left in batteries
(so you know if they are dud or not) and lots of other jobs, in short they are well worth the £10.
http://www.showerdoc.com/installation/electrical-products/SKYTRO-600-005-Digital-Multi-Tester
Answered 13 years ago by The Shower Doctor
View Product and Order Online:
Do you need any additional help to find the correct spare part?
Please click the following link if you would like to see other answers or ask a question regarding the Triton Aspirante/T80si/Opal Thermal Cut-out (TCO) - 22009860
If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Thermal Cut Outs Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.
If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Thermal Cut Outs
For any other support request please get in touch.