This question is regarding Triton Topaz T100i - Shower Spares

triton topaz t100i

shower keeps going hot then cold then hot then cold what would this be caused by
Asked 12 years ago by Anonymous
Check shower hose is not kinked or collapsed internally and head is clear.
Check that incoming mains water stopcock and any isolation valve in the feed to the shower are fully open.
Check with supplier thatb ther has not been a reduction in supply pressure or flow.
Check that inlet filter in the solenoid valve is clear.
If all above are ok then it is likely to be the stabiliser at fault , replacement can be ordered online by clicking on the link below.

http://www.showerdoc.com/shower-spares/triton/TRITO-82600800-Triton-Stabiliser-Valve-Assembly-82600800

Answered 12 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Topaz T100i - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.