This question is regarding Triton Topaz T100i - Shower Spares

TTrio Topaz running hot then cold then hot.....?

Our Triton Topaz shower has recently developed a fault whereby when on full power made the temp increases to approx 50degrees and the starts to decrease to around 35degrees whereby it starts to rise again. it will constantly repeat this as long as it is running?

When in eco mode the shower stays around a constant 35degree regardless of the dial?/
Asked 12 years ago by Anonymous
Check the shower hose is not kinked or collapsed internally and the shower head is clear.
Check that incoming mains wayer stopcock and any isolation valve in feed to shower are fully open
Check with your supplier if there has been any reduction in water flow or pressure.
Check that gauze filter in inlet to solenoid valve is clear.
If all above are ok  then it is likely to be the stabiliser valve at fault , replacement can be ordered online by clicking on this link.

http://www.showerdoc.com/shower-spares/triton/TRITO-82600800-Triton-Stabiliser-Valve-Assembly-82600800

Answered 12 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Topaz T100i - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.