This question is regarding Triton Topaz T80si - Shower Spares

Very hot water

Hi

I have a T80si that cannot be adjusted and just pumps out very hot water - please tell me what I need to replace? (water pressure is good - no light comes on except power light)

Thanks

Regards

Matt Jones
Asked 13 years ago by Matt

The things to check first are.

1 That the main valve coming into your house is fully open.

2 Then check that the valve on the line to the shower is fully open.

If these valves are not fully open then there may not be enough water
getting to your shower to cool it properly the overheat safety device will turn
the power off until it cools Then it all starts again

Make sure that the shower head is clean and clear, that the hose isn’t kinked (this can happen just behind the hand set where it is difficult to see) also check the inside of the hose although it can look OK on the outside it could have collapsed internally

The only reason for the water being too hot is that there is not enough water passing through the shower to cool it.

If all the above are OK then you may have a faulty flow valve

Answered 13 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Topaz T80si - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.