Aquatronic 4 hot water issues
1 That the main valve coming into your house is fully open.
2 Then check that the valve on the line to the shower is fully open.
If these valves are not fully open then there may not be enough water getting to your shower to cool it properly, it overheats the safety device cuts in (TCO) and turns the power off to the elements until it cools down and it all starts again!
Make sure that the shower head is clean and clear, that the hose isn’t kinked (this can happen just behind the hand set where it is difficult to see) also check the inside of the hose although it can look OK on the outside it could have collapsed internally
The other possibility is a faulty flow/stabilizer valve not allowing the correct amount of water into the shower.
There is a link below that explains the above.
www.youtube.com/watch?v=m0xrObqfGqg
With this shower it may also be a faulty pcb that is causing the problem.
Answered 6 years ago by Barrie Seabright
View Product and Order Online:
Do you need any additional help to find the correct spare part?
Please click the following link if you would like to see other answers or ask a question regarding the Triton Wickes Aquatronic 4 Shower Spares - WPARENT-9
If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.
If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers
For any other support request please get in touch.