This question is regarding Triton Zante - Shower Spares

Triton electirc shower water regulation

Shower changes water from hot to cold and back to very hot. Water temperature keeps on changing automaticaly. What is the problem.
Asked 12 years ago by Anonymous
Check the shower hose is not kinked or collapsed internally and the shower head isn clear.
Check that incoming mains water stopcock and any isolation valve in the feed to the shower are fully open.
Check with your supplier if there has been any reduction in supply flow or pressure.
Check that gauze inlet filter in solenoid valve is clear.
If all above are ok then it is likely to be the stabiliser valve at fault and as this is no longer available a new shower is required.
Our recommended replacement is the Triton T80z and the appropriate wattage model can be ordered online via the link below.

http://www.showerdoc.com/showers/triton
 

Answered 12 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Zante - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.